SocietySeWA Legal Desk
“Always with you on the path of justice.”
Sahakar News Desk · societysewa.in
Flat Renovation Society Permission: Bye-law 46
फ्लॅटमध्ये बदल दुरुस्तीसाठी समितीची परवानगी: उपविधी 46
A member plans to renovate: new flooring, a shifted kitchen platform, or a wall broken to join two rooms. Before the contractor starts, the secretary is often asked whether the society's permission is needed. Bye-law 46 of the Model Bye-laws answers this.
What the provision says
Bye-law 46 has three parts. Under 46(a), no member may make "any additions to or alterations in his flat" without the previous permission of the Committee in writing. Under 46(b), a member who wants to make additions or alterations must apply to the Secretary, giving all the required particulars, and the Secretary and the Committee then take further action on the application in the way the bye-laws lay down for such applications. Under 46(c), no structural changes are permissible without the prior permission of the concerned competent authority.
What it means in practice
Three points follow from the text. First, the permission must be previous, meaning before the work begins, and it must be in writing. Second, the route is a written application to the Secretary giving all the required particulars, not a word with one committee member. Third, for structural changes the Committee's permission is not the only permission needed: the prior permission of the concerned competent authority is also required.
Bye-law 46 does not say who the competent authority is for a particular change. It also says nothing about a time limit, a fee, a deposit or any deemed permission, so none of these should be described as a requirement of this bye-law.
Example: a member wants to remove the wall between a bedroom and the passage. The member applies to the Secretary with the particulars of the work. If the change is structural, a written permission from the Committee under 46(a) is not enough on its own; 46(c) separately requires the prior permission of the concerned competent authority before the change is made.
If work inside one flat later affects a neighbour, for example through leakage, see our article on who pays when water leaks from the flat above.
What your committee should do
- 1Ask every member who plans additions or alterations to apply in writing to the Secretary, giving all the required particulars of the work.
- 2Keep the application on record and deal with it as the bye-laws lay down for such applications.
- 3If permission is given, give it in writing and before the work starts, as 46(a) requires.
- 4Where the work is structural, tell the member that the prior permission of the concerned competent authority is also needed under 46(c). As a practical precaution (not a duty under the bye-law), ask the member to confirm that permission before work begins.
- 5Do not present any fee, deposit or time limit as a requirement of bye-law 46; the bye-law contains none.
What this means for your society
Bye-law 46: flat alterations need the Committee's previous written permission, and structural changes also need the competent authority's prior permission.
Facing this in your society?
Get the compliance handled — and your society legally protected.
Our advocates take on AGM procedure, notices and agendas, statutory registers, records and dues recovery for housing societies across Maharashtra. Tell us about your society and we will prepare a free compliance review for it.
No obligation. We reply within 24 hours.
Written by the SocietySeWA News Desk as general guidance on the law as it stands. It is not a Government circular or order, and not legal advice for any particular society.
General information for Maharashtra co-operative housing societies — not legal advice on any specific matter.
SocietySeWA Legal Desk
11 November 2026